Algorítmo evolucionário para a distribuição de produtos de petróleo por redes de polidutos

The distribution of petroleum products through pipeline networks is an important problem that arises in production planning of refineries. It consists in determining what will be done in each production stage given a time horizon, concerning the distribution of products from source nodes to demand nodes, passing through intermediate nodes. Constraints concerning storage limits, delivering time, sources availability, limits on sending or receiving, among others, have to be satisfied. This problem can be viewed as a biobjective problem that aims at minimizing the time needed to for transporting the set of packages through the network and the successive transmission of different products in the same pipe is called fragmentation. This work are developed three algorithms that are applied to this problem: the first algorithm is discrete and is based on Particle Swarm Optimization (PSO), with local search procedures and path-relinking proposed as velocity operators, the second and the third algorithms deal of two versions based on the Non-dominated Sorting Genetic Algorithm II (NSGA-II). The proposed algorithms are compared to other approaches for the same problem, in terms of the solution quality and computational time spent, so that the efficiency of the developed methods can be evaluated

Produção pesqueira artesanal: diagnóstico ergonômico e bases para um planejamento nutricional situado e a promoção da saúde dos jangadeiros

The traditional fishing with rafts is characterized by unpredictability, high stakes and inadequate work conditions. The extensive working hours, physical wear, inadequate nutrition, unsanitary conditions, lack of salvage equipment and instruments suitable working, added by the presence of changes in the nutritional status of fisherman, that contribute to the picture of insecurity in high seas, injuries and health. This study aimed to analyze the activity of the fisherman s from Ponta Negra, Natal / RN, and check the conditions of supply of these fishermen and their implications on health and development of their work. To this finality, was used a methodology based on the ergonomic work analysis employing techniques such as observational and interactional conversational action, listening to the answers, observation protocols, photographic and video records. The script conversational dynamic action was developed from literature searches about the artisanal fisheries, culture and food habits of this population, and analyzes the overall situation of focus and two reference situations. To collect data on the usual diet of fisherman as well as quantitative and qualitative analysis that was used for data analysis and 24h recall the Food Frequency Questionnaire (FFQ). The impact of this power to the health of fisherman was evaluated performing a nutritional assessment. The results revealed that the fishermen carry out their activities with poor working conditions, health and nutrition. Feeding practices of these fishermen undertake development work, making it even more stressful, as well contributing to the emergence of Chronic Noncommunicable Diseases. The management of the activity, as well as the current structure of the vessel, also contributes to the adoption of inappropriate feeding practices during the shipment of catch. The results of this indicate the need for adequate interventions in order to assist in recovery and / or maintenance of health of fisherman minimizing reflections of nutritional disorders for the development activity by improving the quality of life in this population

A importância da Arquitetura da Informação no planejamento de ambientes digitais inclusivos

SANTOS, Raimunda Fernanda dos; SILVA, Eliane Ferreira da. A importância da Arquitetura da Informação no planejamento de ambientes digitais inclusivos.In: SEMINÁRIO DE PESQUISA DO CENTRO DE CIÊNCIAS SOCIAIS APLICADAS,17.,2012,Natal/RN. Anais... Natal/RN: Centro de Ciências Sociais Aplicadas, 2012. Trabalho oral.

Outorga onerosa do direito de construir e dinâmica do mercado imobiliário formal: planejamento e descaminhos na expansão urbana de Parnamirim RN (2008-2010)

The `Outorga Onerosa do Direito de Construir - OODC` (Public Concession of Building Rights), instrument instituted by The City Statute in 2001, has as main objective the recovery of urban property, seeking for a fair distribution the urbanization benefits. The possibility of usage of the OODC instrument is linked to the maximum utilization coefficient, determined to specific areas in accordance to existing infrastructure conditions, further taking into account the formal real estate market, expansion axis and crowding. Being an instrument which establishes values to be paid for a better use of land, it maintains a narrow relation to the real estate, incentivizing or discouraging the crowding in specific areas. The present study investigates the relationship between the criteria for the making of the Public Concession of Building Rights instrument and the dynamics of the formal real estate market. It takes as empiric universe Parnamirim (RN), part of the Natal Metropolitan Area (RN), focusing on the application of the OODC in the period of 2008-2010. It seeks to better understand the necessary basis for the formulation of the instrument, about how it works and its relation to the formal real estate market. It aims to depict the formal real estate market by presenting the production of urban space in Parnamirim in terms of intensity and nature of the real estate, furthermore identifying the licensed properties through the application of the municipality instrument. For the conclusion, it is discussed the criteria for the formation of OODC, its relationship to the dynamics of the formal real estate market and its influencing possibilities in the processes of usage and occupation of land in the context of urban planning

Condomínios fechados: a produção habitacional contemporânea e a auto-exclusão dos ricos no espaço urbano de Natal RN (1995 2003)

The present work analyzes the fast evolution of gated communities in Natal-RN´s urban space. Characterized by the occupation of large areas, providing private security and utilities, this kind of real estate use arises a long list of questions and issues from society and scholars, due to privatization of urban space, bending of law constraints and the lack of an integrated planning of the cities where they are built. The reasons for its fast growth in Brazil s urban areas are analyzed, considering the impact on formal urban planning and municipal services and on the identification of urbanistic, architectural pattern and constraints, as well as legal, social and economic issues. This study is based on the detailed analysis of the first three units of gated communities built in the urban space in Natal, between 1995 and 2003, including their evolution throughout time and the specific social and economic reasons for its present widespread adoption in Brazilian real estate market and, particulary, in our city. The main objective of this piece of work is to answer the why s and how s these phenomena evolved, setting a basis for the definition of adequate public policies and regulation of this kind of urban land use

Produção de enzimas quitosanolíticas utilizando Paenibacillus ehimensis e Paenibacillus chitinolyticus para obtenção de quitoologossacarídeos

The acquisition of oligosaccharides from chitosan has been the subject of several studies in the pharmaceutical, biochemical, food and medical due to functional properties of these compounds. This study aimed to boost its production of chitooligosaccharides (COS) through the optimization of production and characterization of chitosanolytic enzymes secreted by microorganisms Paenibacillus chitinolyticus and Paenibacillus ehimensis, and evaluating the antioxidant potential of the products obtained. In the process of optimizing the production of chitosanase were employed strategies Fractional Factorial Experimental Design and Central Composite Rotatable Design. The results identified the chitosan, peptone and yeast extract as the components that influenced the production of chitosanase by these microorganisms. With the optimization of the culture media was possible to obtain an increase of approximately 8.1 times (from 0.043 to 0.35 U.mL U.mL-1) and 7.6 times (from 0.08 U.mL-1 to 0.61 U.mL-1) in the enzymatic activity of chitosanase produced by P. chitinolyticus and P. ehimensis respectively. Enzyme complexes showed high stability in temperature ranges between 30º and 55º C and pH between 5.0 and 9.0. Has seen the share of organic solvents, divalent ions and other chemical agents on the activity of these enzymes, demonstrating high stability of these crude complexes and dependence of Mn2+. The COS generated showed the ability of DPPH radical scavenging activity, reaching a maximum rate of scavenging of 61% and 39% when they were produced with enzymes of P. ehimensis and P. chitinolyticus respectively. The use of these enzymes in raw form might facilitate its use for industrial applications

Síntese do Poli (ácido láctico) por policondensação direta utilizando um planejamento fatorial

The environmental impact caused by the disposal of non-biodegradable polymer packaging on the environment, as well as the high price and scarcity of oil, caused increase of searches in the area of biodegradable polymers from renewable resources were developed. The poly (lactic acid) (PLA) is a promising polymer in the market, with a large availability of raw material for the production of its monomer, as well as good processability. The aimed of this study was synthesis PLA by direct polycondesation of lactic acid, using the tool of experimental design (DOE) (central composite rotatable design (CCRD)) to optimize the conditions of synthesis. The polymer obtained was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), viscosimetric analysis, differential scanning calorimeter (DSC) and size exclusion chromatography (SEC). The results confirmed the formation of a poly (lactic acid) semicrystalline in the syntheses performed. Through the central composite rotatable design was possible to optimize the crystallization temperature (Tc) and crystallinity degree (Xc). The crystallization temperature maximum was found for percentage of catalyst around the central point (0,3 (%W)) and values of time ranging from the central point (6h) to the upper level (+1) (8h). The crystallization temperature maximum was found for the total synthesis time of 4h (-1) and percentage of catalyst 0,1(W%) (-1). The results of size exclusion chromatography (SEC) showed higher molecular weights to 0,3 (W%) percent of catalyst and total time synthesis of 3,2h

Aplicação da metodologia de planejamento de experimentos para formulação de massas cerâmicas para telhas

Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations

Planejamento em saúde no Brasil: convergências e divergências entre instâncias de gestão

Trata-se de uma investigação que busca revelar convergências e divergências no processo de planificação da Política Pública de Saúde, com foco primordial na participação dos organismos de representação social na consolidação do Sistema Único (SUS), destacando a Conferência Nacional de Saúde CNS, instância que deve ter participação obrigatória na formulação de recomendações para essa política estatal. Considera que a planificação reúne elementos de concepção jurídica, técnica e política para a elaboração dos documentos intitulados Planos Nacionais de Saúde PNS. A partir de pesquisa qualitativa de base documental e argumentação com apoio de Cartografia Simbólica, põe em exame o processo de elaboração e o teor presente nos relatórios da 12ª (2003), 13ª (2007) e 14ª CNS (2011), alinhando seus eixos, diretrizes e prioridades nos correspondentes PNS nos quadriênios 2004-2007, 2008-2011 e 2012-2015. A escolha desses instrumentos, na temporalidade sugerida, tem por esteio o período em que a implantação do sistema de Planejamento do SUS PlanejaSUS, orienta normativa e tecnicamente a elaboração do PNS, tendo como uma de suas referências o que foi emanado das conferências. Propõe-se verificar as tensões existentes entre momentos distintos da definição das prioridades elencadas nas políticas públicas de saúde à luz das contribuições teóricas sobre a concepção do Estado, numa visão contemporânea associada à sua dinâmica de atuação vinculada ao modo de produção e acumulação capitalista; sobre a metodologia do Planejamento Estratégico com base na participação de atores diversos; e ainda, na análise sobre a expressão desse participacionismo na ótica dos processos democráticos representativos no SUS. Na confecção dos mapas cartográficos foi proposta a correlação entre os conteúdos dos Relatórios das 12ª a 14ª conferências de saúde com o que está expresso nas prioridades constantes nos Planos Nacionais de Saúde (2004 a 2007, 2008 a 2011 e 2012 a 2015), verificando-se aproximações e distanciamentos existentes entre o que expressa a sociedade e a política governamental. Conclui-se que, do exame crítico entre as diretrizes e prioridades contidas no acervo documental existente e sua metodologia de construção, com fundamento na argumentação do aporte teórico trabalhado, são verificadas tensões e harmonizações que revelam pontos convergentes e dissonantes das pactuações e consensos entre os atores sociais representantes dos segmentos, no qual critério da representatividade condiciona a defesa de opiniões, interesses e prioridades, de modo diverso para os que estão implicados nesse processo de planificação

Desenvolvimento de um sistema de planejamento, gestão de serviços e controle de custos em obras de construção civil

The increasing competitiveness of the construction industry, set in an economic environment in which the offer is now greater than the demand , causes the prices of many products and services, are strongly influenced by the processes of production and the final consumer. Thus, to become more competitive in the market and construction companies are seeking new alternatives to reduce and control costs, production processes and tools that allow for close monitoring of the construction schedule, with the consequent compliance deadline with the client. Based on this scenario, the creation of control tools, service management and planning work emerges as an investment opportunity and an area that can promote great benefits to construction companies. The goal of this work is to present a system of planning, service management and costs control that through worksheets provide information relating to the production phase of the work, allowing the visualization of possible irregularities in the planning and cost of the enterprise, enabling the company to take steps to achieve the goals of the enterprise in question, and correct them when necessary. The developed system has been used in a piece of real estate in Rio Grande do Norte, and the results showed that its use together allowed the construction company to accompany their results and take corrective and preventive actions during the production process, efficiently and effective

Contribuições da pesquisa operacional para gestão da produção e operações : uma análise exploratória da literatura

This research aims to investigate the evolution presented during three decades (1980, 1990 and 2000) of using the tools of Operations Research (OR) as a suport to decision making in Production Operation Management (POM). Hypothesis tests were made to verify the proportional growth of a given area over the decades to the detriment of the areas of facility layout, capacity planning, production scheduling and inventory management. Six journals were selected and from them more than 800 articles were used for classification and analysis in the grounds of review. It also discussed possible ways for future research and comparisons are made with other papers of literature review. As a result, it was found that areas of heuristics and simulation showed a greater quantity of contributions in all POM areas of this study

A eficácia na execução do planejamento estratégico no poder judiciário do Rio Grande do Norte

This paper presents an analysis of the current strategic plan of the Judiciary of Rio Grande do Norte emphasizing the evaluation of strategic indicators verifying the effectiveness in implementation, since the implementation of the Balanced Scorecard as a tool for performance evaluation of strategic management. The research presents the strategy map and the evaluation indices of strategic performance reporting on the effectiveness. After literature review and documentary, is making the measurement of indicators that are treated from the standpoint of an exploratory and descriptive in strategic planning used by the judiciary Potiguar. The problem was evaluated qualitatively and quantitatively using statistical techniques for data analysis comparing them between Judiciaries of Brazilian States. With respect to data collection was used performance indicators extracted from the data of Justice in Numbers provided by CNJ the period from 2004 to 2011, and the information sought in the Sector Strategic Planning TJ / RN. The main results of this study are as follows: Acquisition of insight into what level is the strategic planning of the judiciary of Rio Grande do Norte and the evolution of its performance indicators comparing them with the states of RS, CE, SE and the National Judiciary

Proposição de um modelo para análise de fluxo de carga, curto-circuito e simulação de relés de produção

The objective of the present work is develop a model to simulate electrical energy networks in transient and stead states, using the software ATP (Alternative Transient Program), able to be a way to join two distinct themes, present in classical methodology planning networks: short circuit analysis and load flow theory. Beyond that, using a tool for relay simulation, this paper intend to use the new developed model to investigate the influence of transient phenomenon in operation of protection relays, and calibrate the enterprise's protections relays. For testing the model, some relays, actually, installed at COSERN were used

Produção de biodiesel a partir de óleo de coco (Cocos nucifera L

The production of biodiesel has become an important and attractive process for the production of alternative fuels. This work presents a study of the biodiesel production from coconut oil (Cocos nucifera L.), by two routes: direct transesterification using NaOH as catalyst and esterification (with H2SO4) followed by basic transesterification. The reactor was built in pirex with 1L of capacity and was equipped with a jacket coupled with a thermostatic bath to temperature control, a mecanical stirring is also present in the reactor. The analysis of oil composition was carried out by gas chromatography and esters compounds were identified. The parameters of molar ratio oil/alcohol, reaction time and temperature were studied and their influence on the conversion products was evaluated using experimental planning (23). The molar ratio was the most significant variable by the statistical planning analysis. Conversions up to 85.3% where achived in the esterification/transesterification, with molar ratio 1:6 at 60ºC and 90 minutes of reaction. For the direct transesterification, route conversions up 87.4% eas obtained using 1:6.5 molar ratio at 80ºC and 60 minutes of reaction. The Coconut oil was characterized by their physic chemical properties and key constituents of the oil. The lauric acid was the main constituint and the oil showed high acidity. The biodiesel produced was characterized by its main physicochemical properties, indicating satisfactory results when compared to standard values of National Petroleum Agency. The work was supplemented with a preliminary assessment of the reaction kinetic

Produção de quitosanase por aspergillus ochraceus em cultivo descontínuo submerso

In this work a 24 factorial design with triplicate at central point was used in order to investigate the influence of chitosan concentration (substrate) (Cs), culture media temperature (CMT), aeration ratio (AR) as well as agitation (A) on chitosanase production by Aspergillus ochraceus. Experiments were carried out using the following levels to the factors: (Cs) (-1) 0.1%; (0) 0.15%; (+1) 0.2%; (TMC) (-1) 25 minutes; (0) 30 minutes; (+1) 35 minutes; (RA) (-1) 0.4; (0) 0.6; (+1) 0.8; (A) (-1) 90 rpm, (0) 120 rpm, (+1) 150 rpm. One chitosanolytic activity (U.mL-1) was defined as the enzyme necessary to produce 1.0 mmol.min-1 of glicosamine by mL of extract. Chitosanolytic assays were carried out using two extract volumes, 0.05 and 0.1 mL, respectively. Results showed that was possible to produce chitosanase of order aproximatelly 5,9 U.mL-1 by Aspergillus ochraceus and chitosanolytic activity was increased by increment on substrate concentration, aeration ratio as well as agitation while media culture temperature increment decreased activity